Separate names with a comma.
Interested in talking motorbikes with a terrific community of riders?Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.
Discussion in 'Technical and Troubleshooting Torque' started by boomy, Jun 30, 2007.
Does anybody know how to change the shift lights settings on a 06 gsxr 1000
Did ya read the manual?
There are manuals online if you do a search on this site for manuals you will probably find one.
Its in your Manual,
Ill have a look at mine at home tomorrow and get back to you
Few things you can adjust:
Press SEL and turn on ignition (no need to start the engine..). SEL is the bottom left button beside the tacho.
You can then adjust each of blink/no blink, brightness and rpm limit.
Push ADJ (top left button) and you enter blink/no blink/off mode. You will see as you change the setting the lightning bolt appear or dissapear in the gear change lcd bit showing you what you have selected. Pushing ADJ cycles between these.
Next push SEL (bottom left) to change brightness. The ADJ button is used to change the actual setting in 5 steps
Next push SEL (bottom left) to change rpm limit. You press the ADJ button and you will see the tacho needle swing up to the new setting. You can keep pressing it to step it up or press and hold - it moves pretty quickly.
Have fun. Page 2-11 of the manual says it all.