Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

Sach Madass throttle stuck

Discussion in 'Technical and Troubleshooting Torque' at netrider.net.au started by CRAPPY0748, Mar 27, 2010.

  1. I have a 2007 Sach Madass 125, the throttle is seized. It had been sitting out in the weather before going into my new shed about a month ago. What can I do to un-seize the throttle. Where do I start?


     
     Top
  2. If it moves and it shouldn't - Duct tape
    If it doesn't move and it should - WD40

    If neither of those work - use a hammer

    Hope that helps :)


    -
    Chris
     
     Top
  3. Disclaimer: I have no idea about the Sachs set up so I am only guessing here, but ...

    Could be the twist mechanism on the handlebar, the cable or linkages sticking at the carby.

    Disconnect the cable at both ends and see which of the three is free and which is sticking. If its the cable replace it. If it's one of the other two it's probably needs cleaning and some lube.
     
     Top