Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

RMX250 Help.

Discussion in 'Technical and Troubleshooting Torque' at netrider.net.au started by rmx250, Jun 28, 2007.

  1. Hey guy's,
    i purchased a rmx250 99' with a full rebuild,
    i rode the bike for about a week an it started to be come jumpy, so i put a new plug in, the next day i went for a ride turned the bike of an now it wont start, i have checked for spark an there is none, from the plug an i have taken the plug of an tried to earth out the wires still no spark, i brought a new coil an still same thing,

    could someone please be able to give me some advise as what i can check befor i go buy a cti ignition? an how do i hard wire the whole bike so i dont have to use the key an take all wires away from light's ect, it doesnt have light's on it but wires are still there.
    any help will be muchy appreciated thank's Evan
  2. Nice to meet you, yeah i'm good. thanks for asking :p

    CDI unit or altenator.

    To check the CDI you need a workshop manual and a Fluke meter.

    To check the Gen you need a fluke

    If its all beyond you call Small coil rewinds, if they cant fix it it's not fixable.

    Small Coil Rewinds Pty Ltd
    50 Edols St Geelong North VIC 3215
    p: (03) 52788454
    Email Small Coil Rewinds Pty Ltd