Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

Pre load adjuster

Discussion in 'Technical and Troubleshooting Torque' at netrider.net.au started by Dylan05, Jan 23, 2013.

  1. #1 Dylan05, Jan 23, 2013
    Last edited: Jan 24, 2013
    Today I was redoing all my suspension settings so I could set sag correctly. Whilst I was winding the fornt forks preload all the way back to stops the nut and washer popped off. I could see that the thread on the REBOUND adjustment was knackered, stripped, thread so the pre load adjuster nut wont go back on. Short version is this a simple fix ie replace the rebound screw or will I have to get a whole new damping cartridge ?