Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

MIGHTY CAR MODS - DIY Non-Turbo Blow Off Valve (on a bike...)

Discussion in 'The Pub' started by moog, Dec 9, 2009.

  1. #1 moog, Dec 9, 2009
    Last edited by a moderator: Jul 13, 2015
    We've made a kit. The dream is now a reality!!

    Free Mighty Car Mods DVD to first person from Netrider to stick one of these on their bike (bonus points if its a scooter)

  2. :LOL: Tops as always. Love the end
  3. Haha champions

    The thing is though.. you dont NEED a blow off valve to get the same noise, with my car after I changed the engine I noticed the brake booster's one way valve had worn out, and I'd probably cracked one of the rubber hoses leading from the inlet manifold...

    Point is, it'd create a vaccuum of air in the booster under acceleration (shitloads at high rpm) then with a quick back off of the throttle it made a nice whooshy noise \\:D/
    Pretty loud too

    Only downside was if you pressed the brakes repeatedly it lost all boost and was like there wasa brick under the pedal

  4. Tighten that rock nut. Very important.

    Top job guys!