Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

Husky 510 not starting

Discussion in 'Technical and Troubleshooting Torque' at netrider.net.au started by basejumper, Aug 31, 2014.

  1. Hi folks. Was hoping I could get some help. My efi husqvarna 510 is not starting. It's
    * getting spark
    * getting fuel , unscrewed manifold and saw Injector squirting
    * air filter is off and air box is clear.
    I noticed that the rev counter is not showing when it's cranking. Not sure if its meant to or not.
    I'm stumped as it been running great since I got it a month ago. Thanks for your help

  2. I have heard that the auto decompresser can sometimes stick on the carb models.Have a look on Husky Talk website out of the USA,
  3. This is efi
  4. The basic engine architecture is the same,pre 08 carbed post Injected.The website should be Café Husky,not Husky Talk.
  5. I'm not familiar with it but sounds electrical, checked all simple electrical things like grounds etc
  6. too much fuel? Too much air?

    Also, how strong is the spark? Could the timing be completely out?