Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

Hex Head Fairing Bolt Issue

Discussion in 'Bling and Appearance' at netrider.net.au started by josh_182, Dec 20, 2008.

  1. Hey guys, bit odf an odd one, just replacing the front fairing on my CBR250RR as it was cracked from an off, I have one bolt left in on the side that it went over on and all the head is scraped down on it and I can't get allen key in to removing it, any suggestions on how to remove the bolt, it goes straight into the internal thread on the bikes framing.


     
     Top
  2. Dremel and cut a nice straight line through the head so you can get a flat head screw driver on it.

    or, drill a hole in the bolt and either try an easy out (they never are easy) or tap a thread, insert a bolt with a nut on it, tighten nut down and then undo bolt.
    should come out but try the dremel first incase the bolt doesnt work
     
     Top
  3. Visegrips are great for this.
     
     Top