Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

90' FZR Exup cable connection querie.

Discussion in 'Technical and Troubleshooting Torque' at netrider.net.au started by MYToyGE, Feb 17, 2007.

  1. how is the "exup cable" connected on a 90' FZR? there 's1 im lookin at n it says it runs n idol's but the exup-cable isnt connected...is it tought to replace.... or reconnect?

    p.s im new the whole "bike mechanics" thing.
  2.  Top
  3. thats a nice website.. thanks
  4. If it's an FZR250, then without the EXUP valve it will be completely gutless (more so than a usual 250) until about 11k rpm then it will surge forward with almighty gusto! In regards to connecting up the EXUP cables again, it's a pretty straight forward job to do, but just make sure all the other hardware is in there and functioning otherwise it can get a little frustrating and expensive.

    For more info on the FZR250 jump on over to the two forums linked in my signature. FZR250.com is a treasure trove of information. :grin: