Welcome to Netrider ... Connecting Riders!

Interested in talking motorbikes with a terrific community of riders?
Signup (it's quick and free) to join the discussions and access the full suite of tools and information that Netrider has to offer.

2006 Yamaha R6

Discussion in 'Archived' started by thefloppy1, Jul 8, 2012.

Thread Status:
Not open for further replies.
  1. Hi all,
    We are moving OS in the coming months, and as such I have to part with my ride.

    2006 Yamaha R6
    Asking $6000
    Odo: 56937 Km's
    Rego until Nov
    Comes with 2 Paddock stands (Front and Rear)

    It has:
    Braided Brake Lines
    Loads of Anodized parts including:
    Shortie Levers, Pegs, Fairing Bolts, Paddock Stand Pickups, Reservoir covers, Yoke Nut, and Pre-load adjusters

    The bike has been garaged, well looked after.


  2. Netrider price drop
  3. You don't happen to park this bike at the top-end of Elizabeth street in the CBD from time to time do you?
  4. No I don't get to ride it everyday any more :(

    Full time dad and all, but I do ride it into the city a bit. generally park on lonsdale street.
  5. how much did the anodized parts cost all up do you reckon?
  6. They are all Probolt parts and cost around $180, for the Bolts, yoke nut, preload adjusters, reservoir caps, and Fairing bolts. I did get an Oil filler replacement as well, but the O-ring was hard to get into place and it didn't seal so I didn't replace it.
  7. Fair enough.....

    A very similar R6 is often parked up there......I'm stunned it's not the same bike!
    Even down to the red "bling-kit" components.....definitely stands out (y)
  8. And Sold....
Thread Status:
Not open for further replies.